Thread Content
Is a structure that has only a frame or canopy on top with open sides all around considered a factory building? It is required that Class A storage tanks be placed within the factory building (is there a limit of not more than one day’s supply?) ).
It shouldn’t be considered a warehouse; if it is, then everything below the device platform would be warehouses.
Sir, does that belong to the factory building? Because if we take that into account, then can’t we build those open-sided canopies in the tank area? After all, the canopies are also considered part of the factory building, right? ? ? ?
This post was last edited by Watcher Star on 2016-10-31 at 12:07. It depends on what you plan to use it for. Such buildings have a frame structure. All my production workshops are built this way; if they are used for production, they definitely count as factory buildings. A canopy is definitely not it; it’s considered a structure.
Is it used for wastewater treatment? ? ? Does it belong to the factory building? ? So Class A storage tanks cannot be placed in the ceiling above windows? ?
According to fire safety regulations, this is considered an open-type factory building; I’m curious to know what type of medium is used here
The wastewater is adsorbed using resin, and methanol is used for desorption. According to building codes, Class A storage tanks cannot be placed inside manufacturing facilities; likewise, according to petrochemical regulations, Class A storage tanks are not allowed within such facilities. What should be done in this situation? ?
Sometimes, when dealing with nitric acid at around 30%, resins are used to remove organic substances; therefore, feed tanks and discharge tanks must be installed. According to building codes, Class B tanks cannot be placed within the factory building – what should be done in such cases?
Which article specifies that this falls under factory buildings? ?
Check the terminology section for the definitions of different factories
The terminology section does not contain a definition of a factory building