Precautions for operating (inspecting) seawater lift pumps

Thread Content

The Youfu seawater lift pumps are currently widely used in various offshore operation platforms, with the function of lifting seawater being the most commonly utilized. So, what should be taken into consideration when using Yufo seawater lift pumps? Please read the following carefully. 1. Check whether the motor coolant (antifreeze) has been filled. 2. Check the status of the seawater coarse filter and the valves of the copper-aluminum electrolysis unit. . 3. Check whether the pipeline fixing bolts are loose. 4. Check whether the check valve at the pump outlet is installed correctly. 5. Check whether the exhaust valve is properly installed. 6. Check the pump outlet pressure gauge. 7. Check the motor insulation and continuity. 8. Check whether the actual number of lift pipes lowered into the well matches the design drawings. 9. Check whether the pump is rotating in the correct direction. 10. Open the bypass valve of the seawater system fully. 11. Open the exhaust valve at the pump outlet. 12. Open the exhaust valve of the pump outlet pressure gauge. 13. The outlet valve of the seawater lift pump is opened to 1/3. 14. Press the start button next to the machine. 15. Once the pressure has risen, slowly open the outlet valve fully. 16. Adjust the bypass valve of the seawater system to control the pressure at 0.6 Mpa. 17. Check for any abnormal vibration and noise when the pump is running. I believe that after reading all this, everyone must now have a clear understanding of the precautions for operating the Youfu seawater lift pumps. Youfu – the quality you desire, at a price that satisfies you! Phone: 4001008486 QQ: 3190037492