Usage of spherical suspended fillers in the aeration tanks of wastewater treatment plants
Thread Content
As the title suggests, we added it directly to the aeration tank. As a result, the water level rose very quickly, the flow of water was obstructed and the tank overflowed; moreover, a lot of the packing material got blocked at the inlet to the primary sedimentation tank, requiring it to be removed again. Is there a good way to prevent the filler from drifting away?
There is a framework used, with the filler enclosed within this framework cage, which results in high costs. There are also outlets with a blocking frame, one that is smaller.
Thank you. For now, this seems to be the only option; we’ll try adding an internet cafe first, and if that doesn’t work, we’ll go with a fixed bed
Add a crossbeam to the pool and thread the float on a rope.