CO2 gas concentration and recovery
Thread Content
There is a project that requires the extraction and recovery of carbon dioxide from gas. The carbon dioxide content in the feed gas is 15%; after concentration, the purity should be >95% with a recovery efficiency of >90%. If available, you can also communicate via QQ, and there may be compensation offered
This post was last edited by wumian on 11/8/2018 at 15:41. It’s quite simple – it can be achieved using either the MDEA or MEA chemical absorption methods. We built a test platform at Zhejiang University for the recovery of CO2 from flue gas, with a capacity of 300 NM3/H; the conditions of the gas supply are similar to yours. The recovered CO2 content is about 99% (on a dry basis), with a recovery rate of 92–94%.