How to choose a valve
Thread Content
Valves are required for the automated renovation of intermittent production liquid separation. Which valves have a relatively fast response time?
This post was last edited by CHANGBAISHI on 2020-11-4 08:28. The question is too general; it depends on factors such as the valve’s diameter, pressure, and the state of the medium. The actuators for pneumatic valves that are commonly used have a fast response time. As a reference, ball valves controlled by pneumatic systems are suitable for smaller diameters, while butterfly valves are better suited for larger diameters. For reference.
For example, a DN100 pipeline, at atmospheric pressure, 50 degrees Celsius, with an oil-water mixture
For valves with a caliber of 50 or higher, you might consider our factory’s patented products: they feature a stable air supply of 7 kilograms and a response time of less than 0.5 seconds. 15063629978 is the same WeChat ID; you can add me on WeChat for further discussion.
Quick cut valves are generally pneumatic
Pneumatic butterfly valves can meet the requirements
What was said upstairs is right; pneumatic butterfly valves are more than sufficient