Thread Content
Product details: The floating oil discharge device is mainly composed of four parts: a rotary joint, an oil transfer pipe, a float ball, and an oil suction nozzle. The swivel joint is connected to the tank wall nozzle via flanges. One end of the oil transfer pipe is connected to the swivel joint, while the other end is connected to the oil intake nozzle; finally, the oil intake nozzle is fixed in place by bolting it to the float. The floating oil extraction device is suitable for use in various horizontal and vertical storage tanks. One end of it is connected to the oil outlet pipe at the bottom of the tank, while the other end, along with a float, hangs below the liquid surface and moves up and down as the liquid level changes, thereby continuously extracting the fuel from the surface layer. Due to the sedimentation of water and impurities under the effect of gravity, the water and impurities in the upper layer of fuel are always at lower levels than those in the lower fuel layer. Therefore, by using a floating oil extraction device in the tank to draw out the fuel from the upper layer, it is possible to obtain cleaner fuel, thereby extending the lifespan of the downstream purification equipment. Technical parameters and specifications: 1. Product name: Floating oil discharge device, floating oil suction device, floating oil pumping device. 2. Nominal diameter: DN50~DN500mm (2”~20”). 3. Nominal pressure: PN0.6~1.6Mpa (150LB). 4. Valve body material: Carbon steel, stainless steel 304, 316L. 5. Gasket material: PTFE. 6. Float material: 304, 316L. 7. Suitable media: Aviation kerosene, gasoline, diesel, etc. 8. Upper swing angle: 90 °C 9. Product standard: Q/FHY01-2006 \"Floating oil unloading device\" 10. Connection standards: HG20592-09, ASME B16.5 150LB RF Ordering parameters: 1. Type of oil tank (vertical or horizontal) 2. Diameter of the oil outlet pipe (outer diameter and wall thickness) 3. Nominal pressure and standard of the outlet pipe flange 4. Inner diameter of the oil tank and oil filling height 6. Height from the center of the outlet pipe to the bottom of the tank