[Soda ash knowledge] Daily question (163) 2010.3.25
Thread Content
How to reduce losses during filtration? Please hide the reply. If you do not hide it, you will not be graded in principle. Edited posts will not be graded. Specific hiding methods: http://bbs.hcbbs.com/viewthread.php?tid=492556&highlight=%D2%FE%B2 %D8 The title of this issue is taken from the electronic version of the book "Technical Workers Job Training Question Bank-Soda Ash Production Operator": http://bbs.hcbbs.com/thread-13140-1-2.html
1. Maintain uniform distribution of wash water to prevent large water flows from impacting the alkali layer and spraying into the alkali tank.； 2. Properly raise the liquid level of the alkali tank to prevent the filter drum from being uneven with alkali and excessive local erosion. ； 3. Back up the vehicle on time to clean the filter. If the filter is found to be leaking, you should report it for repair in time. If it is serious, replace the filter. ； 4. Maintain an appropriate distance between the scraper and the filter drum to increase the return rate of the air blowing filter. ； 5. Control the washing water temperature between 30 and 40 degrees Celsius, not too high or too low.
1. Maintain uniform distribution of wash water to prevent large water flows from impacting the alkali layer and spraying into the alkali tank.； 2. Properly raise the liquid level of the alkali tank to prevent the filter drum from being uneven with alkali and excessive local erosion. ； 3. Back up the vehicle on time to clean the filter. If the filter is found to be leaking, you should report it for repair in time. If it is serious, replace the filter. ； 4. Maintain an appropriate distance between the scraper and the filter drum to increase the return rate of the air blowing filter. ； 5. Control the washing water temperature between 30 and 40 degrees Celsius, not too high or too low. 1# steinback
1. For this reason, the washing water is distributed evenly to prevent large flows of water from impacting the alkali layer and spraying into the alkali tank. 2. Properly raise the liquid level of the alkali tank to prevent the filter drum from being uneven with alkali and excessive local scouring. 3. Back up the vehicle on time to clean the filter.
1. Maintain uniform distribution of wash water to prevent large flows of water from impacting the alkali layer or spraying into the alkali tank. 2. Properly raise the liquid level of the alkali tank to prevent excessive erosion of the uneven parts of the filter drum. 3. Back up the vehicle on time to clean the filter. If you find that the filter is broken, you should report it for repair in time. If it is serious, replace the filter. 4. Keep an appropriate distance between the scraper and the filter, and increase the back-filtration of the blower to wash the filter. 5. Control the washing water temperature between 30-40 degrees Celsius, not too high or too low.
Maintain uniform distribution of wash water to prevent large water flows from impacting the alkali layer and spraying into the alkali tank； Properly raise the liquid level of the alkali solution tank to prevent the filter drum from being uneven with alkali and excessive local erosion. ； Reverse the vehicle on time to clean the filter. If the filter is found to be leaking, you should report it for repair in time. If it is serious, replace the filter. ； Maintain an appropriate distance between the scraper and the filter drum to increase the return rate of the air blowing filter. ； Control the washing water temperature between 30 and 40 degrees Celsius℃
1. Maintain uniform distribution of wash water to prevent large water flows from impacting the alkali layer and spraying into the alkali tank.； 2. Properly raise the liquid level of the alkali tank to prevent the filter drum from being uneven with alkali and excessive local erosion. ； 3. Back up the vehicle on time to clean the filter. If the filter is found to be leaking, you should report it for repair in time. If it is serious, replace the filter. ； 4. Maintain an appropriate distance between the scraper and the filter drum to increase the return rate of the air blowing filter. ； 5. Control the washing water temperature between 30 and 40 degrees Celsius, not too high or too low.
How to reduce losses during filtration? Control the vacuum degree, control the liquid level, reduce leakage and leakage, and keep the equipment intact
1). Maintain uniform distribution of wash water to prevent large water flows from impacting the alkali layer and spraying into the alkali tank.； 2). Properly raise the liquid level of the alkali solution tank to prevent unevenness of the filter drum and excessive local washing. ； 3). Reverse the vehicle on time to clean the filter. If the filter is found to be damaged, you should report it for repair in time. If it is serious, replace the filter. ； 4). Maintain an appropriate distance between the scraper and the filter drum to increase the return rate of the air blowing filter. ； 5). Control the washing water temperature between 30 and 40°C, not too high or too low.
1. Maintain uniform distribution of wash water to prevent large water flows from impacting the alkali layer and spraying into the alkali tank.； 2. Properly raise the liquid level of the alkali tank to prevent the filter drum from being uneven with alkali and excessive local erosion. ； 3. Back up the vehicle on time to clean the filter. If the filter is found to be leaking, you should report it for repair in time. If it is serious, replace the filter. ； 4. Maintain an appropriate distance between the scraper and the filter drum to increase the return rate of the air blowing filter. ； 5. Control the washing water temperature between 30 and 40 degrees Celsius, not too high or too low.