Areas in soda ash production where titanium equipment is required
Thread Content
Dear experts, could you please tell me where titanium equipment is required in the soda ash production process, as well as the methods for wastewater treatment?
In the production process of soda ash via the ammonia-soda process, titanium equipment is required for both sodium bicarbonate crystallization and calcination.
For similar posts, it would be best if you posted them in the Advertising Information section.
Here is a link introducing the properties and uses of titanium equipment used in soda ash production: http://www.susepipe.com/product/showproduct.php?lang=cn&id=3. It provides information regarding the properties of titanium materials.
Titanium plate heat exchangers, titanium valves; there aren’t many other products, right?
It is preferable to use titanium tubes for all heat exchange tubes in contact with the mother liquor; titanium tubes are basically used in cooling water tanks of carbonation towers, etc.
Titanium is also used for the water tank in the absorber tower and some heat exchangers in calcination.
Titanium is also used for the water tank in the absorber tower and some heat exchangers in calcination. Carburization and crystallization also require the use of a titanium pump
The 316L material used for the II ammonia mother liquor pump is susceptible to corrosion, resulting in a short service life; it is better to use titanium pumps.