Reasons for high temperature in the total condenser ( )
Thread Content
Reasons for high temperature in the total condenser: A, increased acetylene flow rate at the synthesis unit; B, high temperature and low pressure of the cooling water; C, poor discharge from the total condenser; D, freezing of the exhaust gas condenser
Severe scaling on the circulating water side of the total condenser affects the water flow rate and heat exchange efficiency.
BCD is a possibility; it depends on an analysis of the specific issue. Another possibility is that the production load exceeds the theoretical design value, or the compressor outlet temperature is too high.
Any of abcd is possible; it mainly depends on the conditions on site. Issues such as poor material feeding lead to changes in pressure, while variations in load and temperature also occur. A high temperature of the equipment’s cooling water, low pressure, or poor heat exchange efficiency have the most significant impact
All four possibilities exist; the specific cause should be identified one by one based on the operating conditions.