Analysis and Prospects on Current Production and Sales of Epoxy Resin Curing Agents in my country (2)

Thread Content

2. Development and hope of domestic epoxy resin curing agents 1. As production capacity increases to a certain stage in the epoxy resin market application fields, coupled with the further recovery of the world economy, the distribution of product application fields will undergo fundamental changes. It is inevitable to adjust the layout and optimize quality and variety, and the biggest breakthrough point is 80% destined to be the curing agent. Now, it is not an exaggeration to say that the output value depends on epoxy and making money as a curing agent. Making epoxy bigger depends on economic strength, and making a good curing agent depends on the comprehensive strength of scientific research. The main raw materials of curing agents are a blind spot in the Chinese economy, and curing agent compounding technology is the main weak link in China's epoxy industry. For the development of China's epoxy resin industry, the first fundamental change is to develop and master the advanced compounding technology of curing agents. The total output of domestic curing agents can exceed 90% of demand, and the overall compounding technology level has basically reached the international level. This is the hope of the industry. It is hoped that these goals can be achieved within the "Twelfth Five-Year Plan" to cooperate with the "Twelfth Five-Year Plan" of the adhesive industry. The goal of epoxy adhesives is to be produced at a rate of 30% to 50% every year. In the world, the raw materials for epoxy curing agents have developed from primary amines into functional composite amines, such as polyetheramines, homodiamines, etc. However, due to historical reasons, primary amines cannot be produced in my country yet. However, this does not matter. The key is to master and possess the technology to use these products to compound functional curing agents as soon as possible. If this is not done, it will be very difficult to explore the high-end epoxy application market. 2. Modern marketing is inseparable from product application services, especially epoxy resin, which is a must-use product in the manufacturing industry but has a lot of application technology variables. Epoxy production companies with large production capacity and long history in the world pay great attention to this aspect. Some large companies, such as Dow, Hansen, Wuxi Petrochemical, Yuehua, Sanmu, Hongchang, etc., are equipped with curing agent production lines, while Nanya, Jiantao and other companies mainly conduct specialized research and development on electronic copper-clad laminate application technology. Without understanding the curing agent composite technology and controlling the application technology, it is impossible to talk about the application of epoxy resin. In the future, China's curing agent industry will not only become more and more professional and larger in scale, but also the epoxy resin production enterprises will invest more and more in the preparation, research and development and production scale of curing agents. To become an international epoxy resin production enterprise, it is impossible to do without application sales services, and without the cooperation of curing agents, it is equivalent to pushing customers who have good application services to competitors who have application services and curing agents. 3. In order for China's epoxy resin curing agents to change the current situation of backwardness and mismatch with epoxy production capacity, it is necessary to increase the introduction and research and development of advanced technology. Epoxy resin curing agent is a chemical material with a wide range of applications, but it also has high technical content and equipment requirements. The main high-end technology is controlled by a few well-developed technologies. * * At present, if China wants to develop curing agents, relying solely on its own research and development, the progress will be very slow. If it wants to introduce advanced foreign technologies, it must have a sound intellectual property protection mechanism, pay attention to and care for talents internally, and increase investment in research and development. Only by working together internally and externally can we break through foreign monopolies as soon as possible. In particular, we must change and overcome the bad mentality that refuses to face reality, is unscientific, and does everything possible to get your technology and overwhelm you. It is necessary to cooperate with international enterprises in advocating a harmonious environment of integrity, civilization and respect for intellectual property rights, introduce advanced technology and talents, and make my country's curing agent industry as big as the epoxy resin industry. 3. The application of epoxy resin is related to * * A major event in the development prospects of the manufacturing industry, the rapid growth of epoxy resin in our country has caused us to neglect the adjustment of application structure and targeted adjustment of curing agents, and the optimization work is very lagging behind. In order to break through the developed countries abroad * * To overcome technical barriers, we must strengthen investment in research and development and the rescue training and development of applied technical talents internally, and be modest and learn externally. * , introduced in good faith. If our country's epoxy industry cannot change the research and development of curing agents in a short period of time and its backwardness in production technology, it will bring consequences to all walks of life in our national economy. The amount of curing agent used is equivalent to about 35% of the resin. my country's epoxy resin production capacity will soon exceed 2 million tons. Where is the supporting 700,000 tons curing agent production capacity? If this problem is not solved, China's epoxy resin industry will be like a war horse missing two legs. No matter how strong and beautiful it is, it can only be a lamb to be slaughtered. This is the current status of China's epoxy curing agents. This is also the result of my country's industrial technology lagging behind the world for hundreds of years, but it is by no means what we want. We must make a complete change among this generation of epoxy people, and achieve the goal of advancing hand in hand with epoxy resin and curing agents as soon as possible, becoming a real epoxy superpower, and laying a solid foundation for my country to become a world manufacturing power.