High-sulfur crude oil
Thread Content
The sulfur content in the crude oil has reached 250,000. How should the processing plan be adjusted? I hope to receive guidance from all the teachers!
Adjust that device? The raw materials for what device!
The sulfur content to mass ratio in yours is 25% – someone must have added sulfur to the crude oil
You’re right; the original poster could add one more zero. There aren’t many adjustments needed when processing high-sulfur crude oil – it mainly comes down to the equipment, and specifically to the standards according to which it was designed. If the equipment was designed for low-sulfur crude oil, it’s likely to encounter problems
Regarding the atmospheric and vacuum distillation units: 1. Strengthen the management of electrical desalination of feedstock; 2. Increase the water injection amounts at the tops of both the atmospheric tower and the vacuum tower, and control the locations of these injection points to prevent dew point corrosion. 3. Manage the dosage at each injection point properly, especially for corrosion inhibitors. 4. Detect the iron ion content in the wastewater from the tower top reflux tank.