The fate of the catalytic slurry
Thread Content
What happens to the catalytic slurry? I’m curious to know how the slurry generated by the catalytic units in various companies is handled: 1. Sent outside the plant, 2. Sent to the coking unit, 3. Other methods
Reprocess a portion, coker a portion
For takeaway or coking, all new TMP units are recycled
How is preliminary treatment carried out before decoking?
Should it be sent directly from the catalytic unit, or after settling in the tank area and then pumped over?
After adding a sedimentation agent to reduce the solid content and ash content, it is exported as ship fuel
I remember there were discussions on the forum regarding what to do with the slurry, and the final decision was made from an economic perspective for the entire plant!
Additives are required for sedimentation; if the slurry after sedimentation is sent to coking, the blending ratio can be increased to over 15%
It depends on whether it is for reprocessing or for external use
We have developed a new type of solid sedimentation agent for oil slurry that is at the international forefront. Tests conducted in a domestic refinery with a processing capacity of tens of millions of tons have shown that this agent can achieve a removal efficiency of over 90%; the ash content after treatment is as low as 0.02%. It can be used alone or in combination with chemical sedimentation and physical filtration methods to ensure an appropriate operating cycle and minimum treatment costs. The purity level achieved can even reach that required for carbon fiber production (less than 10 ppm). This agent is suitable for use in processes involving needle coke, foam coke, coking routes, ship fuel, insulating transformer oil, and gasification feedstocks. Phone number: 86-500-027-48 Lingyao Ling