[Civil Engineering Version] Daily Question 20180313
Thread Content
The general order of removing templates is ( ). a. Remove the parts that were installed first before removing those installed later; remove the parts installed later before those installed first. b. Remove the parts installed later before removing those installed first. c. Remove the non-load-bearing parts first, then the load-bearing parts. d. Remove the load-bearing parts first, then the non-load-bearing parts. e. Start from the bottom up, and from the inside out. Answer: bc
The general order of removing templates is ( bc ). a. Remove the parts that were installed first before removing those that were installed later b. Remove the parts that were installed later before removing those that were installed first c. Remove the non-load-bearing parts first, then the load-bearing parts d. Remove the load-bearing parts first, then the non-load-bearing parts e. Start from the bottom up, and from the inside out
c. Remove the non-load-bearing parts first, then the load-bearing parts