Special post for checking traffic violations during the Mid-Autumn Festival holiday
Thread Content
This post was last edited by Hasty Passerby on 2018-9-23 at 08:21. This is a dedicated thread for checking traffic violations during the Mid-Autumn Festival holiday. First and foremost, I wish all fellow netizens a happy Mid-Autumn Festival! To ensure smooth production during the holidays, please use your free time to help check the conditions at the work site and point out any issues, so as to assist them in having a safe holiday! Thank you for your participation and support! ! ! Reference answers: 1. The safety helmet is not worn correctly. 2. Sleeves of the work clothes are not allowed to be rolled up. 3. A protective face shield is not worn. 4. The walkie-talkie is not explosion-proof. 5. There are temporary hoses or wires extending out randomly behind, which is unsafe. 6. There are no grating panels or fences over the ditch
1. Improper wearing of work uniforms and safety helmets (the chin strap of the safety helmet is not fastened properly, and the sleeves of the work uniform are not rolled up)；
For staff: Do not roll up your sleeves when handling chemicals； The chin strap of the safety helmet is not fastened properly ； No gloves were worn either. As for the site: the pipes had no markings ； No safety warning signs ； Temporary pipes and other debris on the ground have not been cleaned up or organized
Safety helmet not worn properly; no protective gloves worn; no protective glasses worn
1. Why is the equipment foundation made of brick-concrete?
Safety helmets and work uniforms are not worn properly, and the way valves are operated also isn’t standard......
Person: The cuffs and collar of the work uniform do not meet the standards； The chin strap of the safety helmet is not tight. Issue: The equipment foundation does not meet the requirements ； The walkways are narrow, and the flooring fails to meet the requirements for moisture resistance and impermeability.
1. The chin strap of the safety helmet is not fastened properly. 2. The cuffs of the work clothes are not fastened properly. 3. A non-explosion-proof F-wrench is being used. 4. Carbon steel bolts are being used for the stainless steel flange bolts, and they are severely corroded; stainless steel bolts should be used instead. 5. The cables are in disarray and run along the gutters
1. Failure to wear protective equipment as required – not wearing protective gloves, sleeves of work clothes not tied properly, etc； 2. The anti-static bonding for pipelines is incomplete ； 3. The gutter is not equipped with a cover or warning signs ； 4. Using hoses on-site is unsafe, does not provide static protection, and knots can lead to accidents ； 5. The on-site horizontal tank is not enclosed by a cofferdam ； 6. The on-site emergency exits are occupied, posing a safety risk ； Everyone is responsible for safe production. Happy Mid-Autumn Festival! ! ! ! ! ! !