Check Violations by Image (October 12, 2018, Issue 2)
Thread Content
Identify Violations by Looking at Images (October 12, 2018, Issue 2) Instructions: 1. There are many violations at construction sites or production sites, which hinder stable and safe production. We hope everyone will point out the issues shown in the images to help them improve their work. Thank you for your participation and support! ! ! Reference answers: 1. Some people did not fasten the straps of their safety helmets. 2. Safety belts were not used when working at heights. 3. The platform was incomplete. 4. People worked while standing on the framework poles. 5. The platform had no fencing. 6. There were no means for emergency evacuation
1. Some personnel at the site were not wearing work uniforms. 2. The scaffolding planks were incomplete. 3. No warning area was established at the site. 4. The scaffolding was not erected in accordance with the requirements
1. Failure to wear a safety belt when working at heights. 2. The upper rungs of the scaffold are not fully covered. 3. People on the left side are standing directly on the scaffold poles. 4. There are too many miscellaneous items at the site
Safety helmets were not worn properly, the scaffolding boards were not secured, safety belts were not used, short-sleeved clothing was worn, and there were no diagonal braces on the scaffolding
1. No platform for working on. 2. Pedals not fully installed. 3. Safety helmet chin strap not fastened. 4. Scaffold lacks diagonal bracing. 5. Platform has no fencing. 6. Safety belt not worn when working at heights. 7. Working while standing on scaffold rods. 8. No means of emergency evacuation. 9. No warning signs. 10. People lying on scaffold rods while working at high heights. 11. Uniform protective clothing not worn. 12. Some people are wearing short-sleeved shirts. 13. Some people have rolled up their sleeves. 14. Platform is set at too high a height; one must bend deeply to see things. 15. There is a lot of clutter at the site
1. Safety helmets not worn properly. 2. The scaffold planks were not secured, no safety belts were used, short-sleeved clothing was worn, and there were no diagonal braces on the scaffold
1. Someone is not wearing work clothes； 2. Failure to wear a safety belt during work at heights ； 3. Pedals not fully installed ； 4. The tray is not secured ； 5. No safety net was installed for work at heights, and personnel were standing on the pipe rack ； 6. No isolation barriers were installed at the construction site, nor were any safety warning signs in place ； 7. No emergency exit was provided for work at heights ； 8. The area around the site was not cleaned up in a timely manner ； 9. No effective isolation measures for concurrent operations.
1. To wear a safety helmet correctly； 2. To wear work uniforms properly ； 3. The horizontal boarding is too narrow, which does not meet the requirements ； 4. Working on overlapping steel pipes is unsafe ； 5. The site is messy, with no safe access routes up or down ； 6. No fire-fighting equipment seen ； 7. The guardian is standing in the non-safe area.
There are no seat belts, and the footrests are not secured
Working at height without a safety rope
1. Failing to wear safety equipment required for working at heights: safety belts, life ropes, fall prevention nets, etc； 2. Improper erection of the scaffolding: large span, lack of diagonal bracing, no upper or lower access paths, planks on the working surface not fully laid out, and planks not secured ； 3. There is no warning barrier or safety signage at the work site