How to troubleshoot faults in ultra-pure water equipment used in industrial production

Thread Content

　　I. Leaks that occur during operation are mainly due to leak points in the water circuit. To address this issue, inspect the water circuits of the ultra-pure water equipment used in industrial production to locate the source of leakage. If it is difficult to find, a dry tissue can be used for testing. 　　II. The high noise decibels are mainly due to unstable placement of equipment, abnormal operation of the compressor, and abnormal raw water conditions; specifically, the absence of a water tower results in gas formation in the water. The water supply pipeline was cut off, causing the pressure pump to run idle and resulting in high-decibel noise from the industrial pure water equipment. To address this issue, regularly repair or replace the water supply pipes, and choose a stable environment to install the water treatment equipment. 　　III. The water quality of the output is low, mainly due to the failure of high-pressure switches or float switches, which prevents them from returning to their normal position. The raw water ball valve and reverse osmosis membrane filter elements became clogged, which led to damage of the solenoid valve as well as blockage of the activated carbon filter elements. It is caused by a series of factors such as abnormal input or output voltage of the water treatment equipment.