Thread Content
This post was last edited by hesonchang214 on 2020-2-18 at 10:09. (1) Function of the raw water tank: To store the system’s raw water, to regulate the incoming water flow, and to help settle impurities present in the water. (2) Function of sand filter: To initially remove sediment, impurities, suspended particles, and other particulates from water, thereby reducing its turbidity. (3) Function of carbon filter: Utilizes the adsorption principle of carbon to remove discoloration, odors, residual chlorine, etc. from water. (4) Function of water softener: It uses cationic resins to replace calcium and magnesium ions in water, thereby reducing water hardness. (5) Function of the security filter: To prevent large particles of impurities from entering the reverse osmosis membrane, thereby avoiding damage to the membrane and protecting it. (6) Function of the reverse osmosis unit: It primarily achieves the production of pure water through reverse osmosis filtration. (7) Function of the pure water tank: Store the reverse osmosis produced water to supply water to the points of use. (8) Function of the pure water booster pump: to provide power for the mixed-bed system. (9) Function of the mixed-bed equipment: It uses cation and anion resins to adsorb and replace cations and anions in water, thereby enabling the output water to meet ultra-pure water standards. (10) Function of the ultra-pure water tank: To store the water produced by the mixed-bed system and supply water to the points of use.