Should the pressure gauge be sent for inspection or inspected on-site?
Thread Content
The semi-annual inspection for the on-site pressure gauge is approaching. Should we send it for inspection, or invite an inspection agency to come and check it? If we send it for inspection, we will need to purchase a new set. Thank you
Surely we can’t dismantle the entire original LNG plant
If there is no spare table, a new one has to be purchased; an application online requires entering the table number
It’s okay to send it for inspection, or you can invite an inspection agency to conduct the inspection!
If the quantity is large, invite an inspection agency to conduct the inspection
Even if it is a backup table, it should be tested and approved in advance before it can be used
They are all sent for inspection; new pressure gauges also need to be sent for inspection before being put into use.
It is sent for inspection in batches for pumps, while tanks and towers are inspected on an ad-hoc basis, you know
It needs to be sent for inspection; even newly purchased pressure gauges must be tested before use, and they can only be used after passing the inspection
Pressure gauges are subject to mandatory inspection, requiring checks every six months, and must have a compliance mark