The chiller cannot start due to liquid in the suction line
Thread Content
Dear colleagues, the refrigeration unit fails to start after startup due to an error indicating liquid in the suction line. What could be the cause? Thank you!
Chiller – that term is too general. It’s best to provide a detailed description, or send a video for easier discussion. Refrigerators usually come in types using Freon or ammonia as refrigerants. If the compressor is carrying liquid, it is more likely that there is a leak in the evaporator. It is recommended to open the flange connection on the water side and conduct a macroscopic inspection to find out. For reference.
Just release the pressure at the inlet; in fact, there is no liquid phase present, it’s just that the inlet pressure is too high