Unit lubricating oil system,

Recently, it was found that the lubricating oil tank of our unit was smoking due to venting at a high level. . . The temperature isn’t very high either, around 30 degrees. . .

Is it the same at your company? ?

This post was last edited by CHANGBAISHI on 2018-3-10 08:05. Steam emission from lubricating oil is normal. Large gas stations are equipped with recovery systems that work by using cooled lubricating oil to exchange heat with oil vapors, thereby reducing the emission of such vapors.

Can water cooling be used? ? ? Is it large in area? ?

Setting up a water cooling tower should be no problem; it can be determined based on the exhaust volume. But it seems like this isn’t necessary; after all, vehicle exhaust emissions are much greater, right? . . . . .

When the drain line for the engine’s fuel tank is positioned at a relatively low level, oil and gas will escape; by setting the drain line at a higher position, the oil and gas cool down within the pipeline, and no more oil or gas will escape

Ours is on top of the fuel tank. . . The pipeline is about 5 meters long. . . It’s pipeline 300, I guess. . . I don’t know how it was designed back then. . There’s a lot of oil and gas. . . I want to make some changes. . Add an oil, gas, and water cooler

Our company uses compressed air as power for the oil mist recovery systems, which are widely used in the petrochemical industry; they are easy to install and require no cables. Feel free to communicate. Contact address: 771700877@qq.com

Shijiazhuang Refining & Chemical: Bringing New Life to Old Facilities 2019-03-22 Source: Sinopec News Network, Petrochemical News. The Party branch of the First Oil Refining Operations Department at Shijiazhuang Refining & Chemical adheres to lean management principles and uses party building to support its core tasks; it has been awarded the title of Advanced Grassroots Party Branch at Shijiazhuang Refining & Chemical on multiple occasions, and in 2018 it was recognized as an Advanced Grassroots Party Organization by the group company. With the implementation of the points system, innovation, excellence, and achievement have gradually become the conscious actions of Party members. To address the persistent problem of minor leaks in some pumps, the Party members in the equipment team organized technical efforts to modify the mechanical seals; by employing new technologies, they improved the operating conditions of these devices, thereby completely resolving the issue of seal leakage in the pumps. To address the issue of oil mist leakage from the oil mist lubrication system of the on-site pumps, six additional oil mist recovery systems were installed to ensure enclosed discharge and recovery, effectively solving the problem and yielding significant environmental benefits. 　　During the annual HSSE inspection, the tidy and organized site environment as well as the use of new technologies were frequently praised by the experts from the inspection team

The oil mist recovery system in the engine room fuel station uses compressed air as power; after two stages of filtration, clean air is discharged from the main unit’s exhaust outlet. No shutdown of the plant is required; an oil mist recovery system for the units can be installed