First maintenance for Ingersoll Rand air compressors
Thread Content
May I ask whether, for the first maintenance of an Ingersoll Rand air compressor, it is necessary to replace the compressor coolant (i.e., the compressor lubricant)? Or what maintenance is required for the first service? The supplier advised us that it is sufficient to only replace the lubricating oil filter element. The power of the air compressor here is 37 kW. Thank you!
Don’t you conduct oil analysis for lubricants? Whether the lubricating oil needs to be replaced is determined based on oil analysis data
Each device comes with a maintenance manual provided by the manufacturer; simply carry out the necessary maintenance tasks at the times indicated in that manual. There’s no technical complexity or high technology involved. Why ignore the equipment maintenance manual?
The equipment manual does not mention the first maintenance service; I learned about it from the equipment supplier and the manufacturer itself
The first maintenance service is simply the initial maintenance; the equipment should come with an operation manual for its maintenance, one that clearly outlines all the maintenance tasks from the first service up to major repairs. It’s strange – how could such a manual be missing? You can ask the after-sales department for a detailed one; it’s free
The first maintenance, which is what you refer to as the initial service, involves simply replacing various filters; it’s also an opportunity to check the color of the oil. Under normal circumstances, there should be no change in the quality of the oil, so no replacement is necessary. Replacement is done when the specified time has passed or when the quality of the oil deteriorates. In short, the overall goal is equipment operation safety and cost-effectiveness.
It is best to replace the pump outlet filter element; the inlet filter should also be removed and cleaned, and the oil must undergo physical and chemical analysis.