Special equipment inspection

Are you in Zhoushan? ? The following is the inspection application procedure for periodic inspection and installation and modification of special equipment used by the reporting unit, which must be handled by the local special equipment inspection and testing department. A. Installation, modification, and maintenance construction units that have been notified by the special equipment safety supervision and management department. Inspection application procedures (1) The construction unit applying for inspection shall submit the following information and go to the central business hall to apply for inspection: 1. The "Notification of Special Equipment Installation, Modification and Maintenance" accepted and filed by the special equipment safety supervision and management department and the relevant information provided when notifying. 2. Construction technology, plans and construction drawings for installation, modification and maintenance of special equipment ； 3. Self-inspection records or completion data of installation, modification and maintenance ； 4 "Application Form for Supervision and Inspection of Special Equipment Installation, Modification and Maintenance". (2) Acceptance 1. There is a dedicated person in the business hall to accept the application. 2. The acceptance personnel will confirm the applicant's or personal information, review the legality, authenticity, and comprehensiveness of the information submitted by the applicant in accordance with the requirements of special equipment safety technical regulations, and inform the applicant of all the information that needs to be supplemented and corrected at once. 3. The applicant shall agree with the acceptance personnel on the phased supervisory inspection items and dates based on the actual construction progress. 4. The acceptance personnel shall inform the applicant in writing of the inspection cooperation matters and issue an inspection acceptance notice. (3) Communication 1. The acceptance personnel should issue supervisory inspection tasks in a timely manner, and the inspectors who accept the tasks should contact the construction unit before the agreed inspection date to implement on-site preparations. 2. The construction unit should make on-site inspection preparations before the agreed inspection date in accordance with the inspection work cooperation requirements notified in writing by the acceptance personnel, and promptly ask the acceptance personnel or inspection personnel for any unclear matters. If there are changes due to construction progress, timely communication should be made with the acceptance personnel or inspection personnel to renegotiate the inspection date. 4. Supervision and inspection 1. Supervision and inspection shall be carried out by inspectors holding relevant inspection qualification certificates in accordance with special equipment safety technical specifications and standards. 2. If the content of the reported materials does not match the on-site conditions, we have the right to refuse supervisory inspection, and issue a "Supervisory Inspection Liaison Sheet" on-site to inform the construction unit or manufacturing unit ； If the situation is serious, a "Supervisory Opinion Notice" will be issued and reported immediately to the special equipment safety supervision and management department. 3. After the inspection work is completed, the inspection personnel should inform the construction unit or user unit in writing of the safety status of the equipment and the time limit for rectification. If any serious accident hazards are found, they should immediately report to the special equipment safety supervision and management department. 4. After the inspection work is completed, the inspection personnel shall issue a fee notice based on the inspection items and Hunan Price Fee Document No. 170, and shall inform the applicant of the time limit for handling relevant procedures. (6) Issuance of reports 1. On-site inspection personnel should issue supervision inspection reports and supervision inspection receipts objectively, fairly and timely. The inspection and approval personnel of the inspection and testing agency are responsible for signing the supervision inspection conclusions. 2. Supervisory inspection reports and supervisory inspection certificates will be issued within 10 working days for general equipment and within 30 working days for large equipment. B. Periodic inspection of in-use special equipment, declaration, acceptance, inspection and report issuance of transfer appraisal. 2. Declaration (1) Applicant: Units or individuals using special equipment that have registered with the special equipment safety supervision and management department. (2) Application time limit: 1. One month before the expiration of the special equipment safety inspection. 2. Before reactivating equipment that has been disabled for more than 6 months. 3. The equipment required for transfer appraisal is to be prepared for transfer. (3) Application procedures: 1. Inspection application 1.1 Equipment users or individuals can apply for inspection in the central business hall or online. 1.2 If equipment transfer appraisal is required, bring the following information to the central business hall to apply for inspection: ◎Certificate from the unit receiving the equipment ； ◎Special equipment registration certificate ； ◎Equipment technical files. 1.3 Fill in the inspection application 2. Acceptance 2.1 The staff of the business hall are responsible for accepting online inspection applications and hall inspection applications. 2.2 The acceptance personnel shall carefully check the correctness of the applicant’s or personal information and submitted materials, and shall ask the applicant to supplement if the information is incomplete. 2.3 After confirming that all the information submitted by the applicant is correct, agree on the inspection date with the applicant and issue an acceptance notice (limited to inspection application in the center’s business hall). If not accepted, the reasons for rejection will be stated in writing. 2.4 Periodic inspection of general equipment shall be arranged 10 working days before the validity period of the license, and periodic inspection of large equipment shall be arranged 30 working days before the validity period. 2.5 The acceptance personnel shall inform the applicant unit in writing of the inspection work cooperation matters. 3. Communication 1. The acceptance personnel should issue inspection tasks in a timely manner, and the inspection personnel who accept the tasks should contact the construction unit before the agreed inspection date to implement on-site preparations. 2. The reporting unit should make preparations for on-site inspection before the agreed inspection date in accordance with the inspection work cooperation requirements notified in writing by the acceptance personnel, and ask the acceptance personnel or inspection personnel in a timely manner for any unclear matters. If the date needs to be rescheduled for special reasons, you should communicate with the acceptance personnel or inspection personnel in a timely manner and re-schedule the inspection date, but the validity period must not be exceeded. 3. Inspection 1. Inspectors holding relevant inspection qualification certificates shall conduct regular inspections of special equipment in use in accordance with special equipment safety technical specifications and standards. 2. After the inspection work is completed, the inspection personnel should inform the applicant unit in writing of the safety status of the equipment and the time limit for rectification. If any serious accident hazards are found, they should immediately report to the special equipment safety supervision and management department.