Issues with lubricating oil for liquid nitrogen pumps and liquid oxygen pumps?
Thread Content
Oil specifications and models, fuel filling port, oil level monitoring
Follow all the instructions as specified; this manual is in three copies, in translated Chinese. Look in the reference room, the equipment department, your own office, or the archives. When refueling, it is appropriate to use the appropriate fuel by referring to the original physical and chemical properties of that fuel.
The specifications, model, and oil volume are all provided in the manual.
It is recommended to follow the suggestions in the device manual. Or you can provide the name of the current oil product, and I can help you make a recommendation
This is a cryopump; it uses liquid oxygen and liquid nitrogen, and this oil is the lubricant specifically designed for cryopumps
Too much fuel was added, and it spilled out during operation. It turns out that only half a bottle can be filled at a time.
Oil model: LOX-120. The filling port is located on top; the amount of oil to add is generally 1/2 to 3/2 of the oil level.