Reuse of wet coal slurry
Thread Content
Which marine expert can come up with a solution for “100 tons of wet coal slurry per day”? Personal plan: First dry it, then shape it, and feed it into the boiler to burn!
It can be burned together, saving energy compared to “drying and shaping”.
The existing furnaces cannot be used for firing, so drying and shaping are being considered!
The furnace feed inlet should be appropriately modified to add coal slime injection ports.
A paddle dryer can be used to dry wet coal slurry into a powder or small particle form, which can then be directly fed into the furnace for combustion. Please visit the blog on drying technology resources: http://blog.sina.com.cn/dcyang01
I went to the blog to read the relevant articles and contact information, but there were some parts I didn’t understand. I’ve been trying to call, but it keeps going to voicemail.