Why can’t the rotation speed exceed 85 r/min after replacing the anchor mixer in the reaction vessel with a frame mixer?

2020-06-08View Original

Thread Content

Why can’t the rotation speed exceed 85 r/min after replacing the anchor mixer in the reaction vessel with a frame mixer?

Reply #22020-06-08

Frame mixers have a large diameter; if the mixing speed is high, the linear velocity becomes excessive, which requires more power and also imposes higher demands on the strength of the shaft.

Reply #32020-06-22

It is mainly the linear velocity at the outer diameter; once it exceeds the design value, erosion and damage can easily occur, leading to a loss of dynamic balance and excessive vibration.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

Quick Links