Screening small balls out of bulk materials
Thread Content
As the title suggests, I need to separate 5cm balls from the material now. Do any experts have any good suggestions to reduce the labor intensity?
Vibrate! First, sift out those that are smaller than him! There aren’t many left that are bigger than the ball!
One screening session can be quite difficult; 2 or more screenings may be required
There’s no other way; I’ll first use a layer of sieve to separate the balls from the larger pieces.
There’s no other way; I’ll first use a layer of sieve to separate the balls from the larger pieces.
Measure the angle of repose of the amorphous powder; install a belt conveyor with an inclined angle to control the thickness of the material layer, allowing the small balls to roll down. . .
If a large volume of material needs to be processed, a rotary screen can be used; the upper part of this screen has small mesh holes that allow small particles to be filtered out, while the lower part has mesh holes large enough for small balls to pass through. The larger pieces of material emerge from the bottom of the screen. The mesh holes in a rotary screen must be track-shaped in order to filter spherical materials.