Spring Inspection Management Personnel Safety Regulations Exam Questions (Heat Engine Section)

Thread Content

I. Fill-in-the-blank questions (2 points per question, 20 points in total) 1. Power production must adhere to the principle of (“safety first, prevention first, comprehensive management”). The safety facilities for new construction, renovation, and expansion projects must be integrated with the main project (designed, constructed, and put into production and use simultaneously). 2. Production managers at all levels must adhere to the principle that \"managing production entails managing safety\"; they should plan, arrange, inspect, summarize, and evaluate safety work alongside planning, arranging, inspecting, summarizing, and evaluating production work. 3. All valves that are above the ground or platform (1.5 meters) and require frequent operation must be equipped with sturdy ladders or platforms that facilitate easy access for operation. 4. It is prohibited to store flammable items in the workplace, such as gasoline, kerosene, alcohol, etc. The small amount of (lubricating oil) required for operation, as well as the (oil containers and oil guns) used on a daily basis, must be stored in the designated storage room. 5. Leaders at all levels should not issue orders that violate safety regulations. Staff members who receive orders to violate safety regulations should refuse to carry them out. In addition to strictly complying with this section themselves, all staff members are responsible for ensuring that those around them also abide by it. If any violation of this section is found that could pose a threat to the safety of persons and equipment, it must be stopped immediately. 6. Anyone entering the production area (except offices, control rooms, duty rooms, and team rooms) must wear a safety helmet. 7. It is prohibited to use any (pipes, railings, scaffolding) to suspend heavy objects or lift equipment. 8. Appropriate (safety warning) signs should be installed separately, depending on the different hazards and harmful factors that may arise from the production site, equipment, and facilities. 9. No (miscellaneous items) shall be placed at entrances, passages, stairs, platforms, etc ； When objects that can easily cause people to trip are temporarily placed on the ground (such as steel cables), obvious (warning signs) must be installed ； When there are objects in the aisle with a height of less than 2 meters, obvious (warning signs) must be installed ； There is (oil, water, mud, etc.) on the ground, which must be removed promptly to prevent slips. 10. When drilling holes in floors and structures, or installing lifting pulleys outside designated locations or stacking heavy objects, prior approval (review and permission) from the relevant technical department of the unit must be obtained.