Appendix A Calculation Problems for Legs
Thread Content
While studying Appendix A of *JB/T4712.2, I noticed that the formulas for calculating the vertical reaction force on a single leg (on both the tensile and compressive sides) are the same. However, the values obtained from the examples given later are different. Could someone please explain what’s going on here? Is there something wrong with the formulas in the standard?
There’s an issue with the formula; there is a missing negative sign “-” in front of the FL2 formula. Please add the negative sign and check again
This post was last edited by zhangjuhua on 2017-6-1 at 19:30; changing the minus sign to a plus sign should work too
There should be corresponding standards, formulas
(A.5) The formula has a formatting error; a negative sign “-” is missing in front of the equal sign for FL2.