How to conduct a hydraulic test on a reactor vessel
Thread Content
How to conduct a hydraulic test on a reactor: Build a set of custom equipment and carry out the test in the workshop where it will be installed and used
Pressure vessels shall undergo hydrostatic testing in accordance with GB150 requirements.
1. When the reaction vessel is a pressure vessel: After it is manufactured, the manufacturer shall conduct a pressure test in accordance with the design documents and the requirements of GB 150-2011 \"Pressure Vessels\". 2. When the reaction vessel is a atmospheric-pressure vessel: After the reaction vessel is manufactured, the manufacturer shall conduct a pressure test in accordance with the design documents and the requirements of NB/T 47003.1-2009 \"Steel Welded Atmospheric-Pressure Vessels\". 3. The preparatory work, requirements, procedures, and acceptance criteria prior to the pressure test are detailed in Section 4.1.9 of TSG 21-2016, \"Safety Technical Supervision Regulations for Fixed Pressure Vessels\".
I’m asking what to do at the user’s site