Calculation of supported bearings
Thread Content
How should the verification calculations be carried out for designing a vertical vessel with support-type bearings, which falls outside the scope of application of JB/T4712.4? Thank you first!
The explanation of JB/T4712.4 includes the calculation method for the allowable load of the bearing body.
How is the actual load carried by a support calculated?
There are calculation methods specified in the standards; you can just use those in Appendix A.
The height exceeds its applicable range...
The design of the tower’s base can be used as a reference
I think the method in Appendix A can be used as a reference.
I took a look at GB 50761, which stipulates that for containers that fall outside the range of \"a height-to-diameter ratio not exceeding 5 and a height of 10 m\", the response spectrum method should be used.