Design of rectangular pressure vessels
Thread Content
Who has worked on the design of rectangular pressure vessels? Usually, I work with circular containers; I don’t know where to start with rectangular ones
This post was last edited by jizhanwei22 on 2018-11-6 at 08:55. 1. If the rectangular container is a pressure-free container, it shall be designed in accordance with Chapter 8 on Rectangular Containers of NB/T47003.1-2009 \"Steel Welded Pressure-Free Containers\", while its manufacturing, inspection, and acceptance shall follow Chapter 9. See the screenshot for details. 2. If the rectangular container is a pressure vessel, it shall be designed, manufactured, inspected, and accepted in accordance with Appendix A \"Containers with Non-Circular Cross-Sections\" of GB/T150.3-2011. See the screenshot for details. If such rectangular container meets the classification criteria specified in TSG21-2016 \"Regulations on Pressure Vessels\", it shall also be designed, manufactured, inspected, and accepted in accordance with TSG21-2016, and subject to supervision and inspection under these regulations. See the screenshot for details.
Thank you, I’ve learned it; I’ll study it carefully