Dear senior boiler experts, I’d like to ask some questions

As long as the company issues a certificate: lol

A boiler operator refers to the personnel in a boiler-using unit who are responsible for the operation of the boilers in use. Boiler operators are classified into Grades I, II, and III, with the following scope of work: (1) Grade I: Steam boilers with a rated working pressure of less than or equal to 0.4 MPa and a rated evaporation capacity of less than or equal to 0.5 t/h, as well as hot water boilers and organic heat carrier boilers with a rated power of less than or equal to 0.7 MW ； (II) Class II: Steam boilers with a rated working pressure of less than 3.8 MPa, as well as hot water boilers and organic heat carrier boilers ； (III) Class III: Steam boilers with a rated working pressure of 3.8 MPa or higher. Note 1: Operators of Class III boilers can perform the tasks of operators of Class II and Class I boilers, while operators of Class II boilers can perform the tasks of Class I boiler operators. III. The following basic requirements must be met in order to apply for a certificate as a Level 3 boiler operator (G3): 1. Being at least 18 years of age ； Men under 60 years old, women under 55 years old. 2. In good health and meeting the specific physical requirements for the type of work applied for ； 3. Have an educational level appropriate for the type of special equipment operation being applied for ； The specific conditions shall be implemented in accordance with the provisions of relevant safety technical specifications. IV. Target participants: The training is intended for third-level boiler operators and maintenance personnel; there is no limit on the number of participants from each organization. V. Documents required for application: 1. Electronic versions of both sides of the ID card ； 2. Electronic version of the highest degree diploma ； 3. Electronic version of 1-inch photo ； 4. Fill out 1 application form for the assessment of special equipment operators ； 5. Fill out 1 application form for training on new certificates for special equipment operators (it must be stamped with the official seal of the organization).

This chapter is a hassle. I work in the chemical industry, and there’s a shortage of staff here. If I submit this request to my superiors, they definitely won’t approve it. What should I do?

Try hard, and unexpected results may arise

For corporate actions, the company’s seal is used; for personal actions, it depends on the relationship with the company’s management. After all, in today’s society, connections are necessary everywhere.

Sure, career planning is available, with corporate support.

You can take the exam; have the company’s HR help get in touch

In principle, one is not allowed to apply. To obtain an operational certificate, one must have worked in the relevant field for at least three months, while a management certificate requires one year of experience. If you really want to take the exam, then find a way; there are many ways to do that

Some training institutions can help you solve this problem