Enameled glass reactor
Thread Content
https://bbs.hcbbs.com/forum.php?mod=image&aid=1776738&size=300x300&key=bfd1d96d5214393e&nocache=yes&type=fixnone https://bbs.hcbbs.com/forum.php?mod=image&aid=1776739&size=300x300&key=a3d14ea8fc3f6dac&nocache=yes&type=fixnone It might be illegal for the workers to cut off the ends of the pipes simply because the openings in the building walls were too small. Although it is not used as a pressure vessel
When the workers were installing it, the hole in the wall was too small, so they simply cut off the end of the pipe – was it because they thought the hole was too small?
There should be no problem; it can be welded back on. This is a jacketed glass-lined reactor, with the inner tank lined with glass and the outer cylinder made of carbon steel.
Yes, I feel this approach is wrong
There’s no other way; the steel structure design didn’t take this into account
After welding, it must undergo non-destructive testing and hydrostatic testing.
The design has problems; it wasn’t thought through properly
Will there be problems with a small spacing and high cutting temperature?