When do the Special Inspection Agency and the Market Supervision Bureau usually send people to inspect special equipment?
Thread Content
When do the Special Inspection Agency and the Market Supervision Bureau usually send people to inspect special equipment? The special inspection agency generally wouldn’t show up unannounced just to cause trouble, right? The market supervision agency will definitely show up; it will come sooner or later. They usually visit the enterprises under their jurisdiction at least once. It’s generally when new projects are set up and a large number of new devices need to be registered that the users, by going through the registration process, end up attracting the attention of these authorities We currently have a piece of equipment that was designed and manufactured not for this purpose; we want to use it as a pressure vessel, but there is no relevant documentation available, so registration is not possible. We’re worried that it will be discovered in the future
Then don’t take the risk and don’t use it as a pressure vessel. However, inspection agencies generally don’t examine every piece of equipment on site; they usually just check the records to see if there are any devices that haven’t been inspected due to expiration. After all, if you fail to register them, the main responsibility lies with you
Now, safety requirements are strict and regulated, and the authorities conduct inspections without prior notice. The using units must strictly follow the specifications and requirements; there must be no complacency.
The current situation is that one unit was designed and manufactured as a pressure vessel, but we are using it as a non-pressure vessel, while the other unit was designed and manufactured as a non-pressure vessel, yet we are using it as a pressure vessel. By swapping these two units, this problem can be resolved. But is it really necessary to go to such lengths as to swap two reactors just for this purpose?
The current situation is that one unit was designed and manufactured as a pressure vessel, but we are using it as a non-pressure vessel, while the other unit was designed and manufactured as a non-pressure vessel, yet we are using it as a pressure vessel. By swapping these two units, this problem can be resolved. But is it really necessary to go to such lengths as to swap two reactors just for this purpose?
This post was last edited by Gao Tianyi on 2019-9-15 at 16:33. The special inspection agency is a testing and inspection organization; if you do not submit an application for inspection, they will not come to your company. Only the market supervision agency has the authority to conduct inspections, supervision, and impose penalties. In your case, it is recommended to carry out the registration for the use of pressure vessels in accordance with the relevant regulations. Don’t try to cut corners now; dealing with inspections in the future will always be a problem. If inspected by the market supervision agency, a fine will be imposed.
That’s basically it: the Quality Supervision Bureau is an enforcement agency, while now it’s the Market Bureau; the Special Inspection Institute is an institutional unit under the Market Bureau that is responsible for conducting inspections. Most companies confuse these two units, mainly because they work together frequently. Due to a lack of specialized knowledge, insufficient understanding of equipment, and inadequate staffing, law enforcement agencies often delegate many inspections to specialized inspection agencies, handling matters based on the feedback provided by these agencies. However, such agencies do not possess the authority, rights, or obligations necessary for law enforcement. Normally, those from the Market Bureau are young civil servants; testing is free in that case. Those from the Special Inspection Agency are usually employees on contract basis, and testing is charged, with the high fees from commissioned testing used to make up for the lower fees associated with mandatory testing. If a company pays its fees on time, the inspection agency generally isn’t willing to conduct inspections; you should understand this if you often fail to pay the fees.
Excluded devices do not require registration or inspection, but it is illegal to use such devices as pressure vessels.
The special inspection agency is an inspection body without law enforcement powers, while the market supervision bureau is an administrative agency with such powers.
During the production phase, the special inspection agency will not contact you on its own; they will get in touch regarding inspection services during the project construction phase. The Quality Supervision Bureau is different; it has enforcement powers over local units that are involved in the manufacturing, installation/maintenance, and use of special equipment. It conducts inspections from time to time, especially after major production accidents occur – in such cases, the central authority requires local authorities to carry out inspections and investigations. Another scenario is when your company makes unauthorized use of special equipment, and someone reports it to the Quality Supervision Bureau.