SW6 cannot generate calculation sheets (Opening Reinforcement – Chinese version)
Thread Content
The last edit to this post was made by marke7 on 2019-10-31 at 14:58: 1. SW6 performs normal calculations, and the results are correct. 2. The opening reinforcement (Chinese version) fails to generate a calculation report, with an error message as shown above； 3. Opening reinforcement (English version): Generate the calculation report as usual ； 4. When generating the calculation sheets separately, everything can be produced except for hole reinforcement (except in the Chinese version). 5. Rebooting the computer is useless; SW6 works sometimes and not at other times – it functions sometimes but fails at other times ； 6. In the device central station mode, delete the unnecessary temporary calculation files and Word templates ； 7. Following the software instructions, replacing BORlndmm.dll had no effect. Two additional points: 8. There should be no issue with the computer system; all nearly 20 computers running SW6 have this problem. 9. Reinstalling the software didn’t help – uninstalling it completely and then reinstalling it worked at first, but the problem reappeared after three days. Is there anyone skilled enough to do it? Seeking advice
Then try replacing the file in \\SW6-2011\bin\, or completely delete Sw6 and reinstall it. The attachment contains the files from my machine; use them after extracting them. Be sure to back up the original file; if it doesn’t work, you can go back to using it.
I’ve experienced it too – reinstalling. It’s usually due to the computer system.
Try reinstalling the software. This software is frustrating to use; it keeps making all sorts of errors.
My SW6 isn’t working either; even reinstalling the system didn’t help, so I ended up getting a new computer
So you’re saying your computer isn’t working properly; P
It feels like there are too many things in 4.0,,,
It doesn’t work. There’s a colleague who can do the calculations, and there have been no problems before; but after copying all the installation files, the issue persists
It doesn’t work; I need to reinstall it. It should last about 2 days, but then the problem appears again
There must be some program in your machine that is modifying the system; delete the virus and repair the system. Pay attention to see if errors occur after using certain software; if so, it’s a software conflict.