Filler seal issues
Thread Content
I am planning to create a device, and I’m looking for good solutions to the sealing issues related to the pipes. The hydrochloric acid concentration is around 15%, and the pressure is 0.3 MPa. Or some other better solution.
There’s not much you can do about axial movement, right?
I don’t understand the specifics; what about two sets? Is it possible? Or choose another type of seal, with telescopic sleeves at both ends. . . .
It is indeed difficult; we might need to change the plan
The inner and outer layers of the tube in the middle are made of PTFE, while the core is made of iron
What’s the point of getting ready? It doesn’t have to be like this, right?
1. The distance over which the pipe moves, as well as the roughness of the pipe surface. 2. If it seems that the packing isn’t reliable enough, adding two sets of skeleton oil seals and gland components should help to prevent leaks
The outer jacket also moves along with the pipeline: lol； The interfaces of the outer jacket are connected by hoses.