Cartography issues
Thread Content
In recent 3D modeling, a problem has arisen: a cylinder that has been stretched, after being saved, becomes an entity whose length cannot be modified. Please refer to my attached images for details. https://hcbbsftp.oss-cn-hangzhou.aliyuncs.com/forum/202007/15/133010u9dqwaijz6yaybid.png This shows the shape right after it was drawn; by selecting one side of the triangular entity, its length can be adjusted, while the other side can be used to change the diameter. https://hcbbsftp.oss-cn-hangzhou.aliyuncs.com/forum/202007/15/133203s6h4lhqlw74lqllu.png After some time, when selecting this option, both ends will show as square dots, and it’s not possible to change the length or size. Has anyone encountered this problem? What exactly is the problem? There must be a problem with the software.
The question is too vague – there are too many possibilities, and there are numerous 3D software options; are you using UG, SW, or Catia? You can upload the drawings you’ve created, and then those who are familiar with these software programs can help you
I don’t know what software it is; it’s not in an editable state?
There’s a problem with that attribute; it hasn’t been defined properly
Looking at the coordinates, this should be CAD 3D modeling. I gave it a try; the height can be changed, but the diameter cannot