Requirements for acrylic acid storage tanks and storage process equipment
Thread Content
The production of this device requires the use of acrylic acid. Tons of this material are currently being used, and due to the high demand, it is desired to store it in tanks. I would appreciate guidance from those with experience – how should tanks be designed for storing acrylic acid? Those who have successfully used such tanks for storage are especially welcome to share their insights
Acrylic can be stored in stainless steel tanks; it has a very low freezing point, so heating is sufficient, but the temperature must not exceed 30 degrees Celsius
Acrylic solidifies below 15 degrees; it tends to polymerize when heated. Hot water tracing pipes should be installed in the pipelines, and external circulation cooling may be necessary for the storage tanks, depending on the situation. Material 304 is sufficient.
This post was last edited by **hai** on 2021-7-1 at 15:02. It depends on whether it will be buried or installed outdoors after your approval; if buried, it will be in a horizontal configuration, while if installed outdoors it can be either vertical or horizontal. Another factor is the capacity of your storage tank. I can help you with any other issues – feel free to contact me via private message on the site for more details