Wall thickness measurement of the coil inside the liquid chlorine vaporizer
Thread Content
One of our company’s liquid chlorine vaporizers features an internal coil design – the chlorine gas is inside this coil. Today, an expert came to conduct an inspection and said that the wall thickness of this internal coil needs to be measured； I would like to ask whether it is necessary to measure the wall thickness of this inner coil (or are there any relevant standards or regulations)? It is not a pressure vessel; the nameplate indicates it as a non-pressure vessel ；
Measuring the wall thickness is mainly necessary because of the severe consequences that can arise if chlorine leaks. However, it is difficult to measure the wall thickness of all the coils; therefore, it is recommended that the vaporizer be equipped with appropriate monitoring systems and measures so that any leak in the coils can be detected promptly and the spread of damage prevented.
The management of highly hazardous materials is very strict!
If you want to measure it, just do it; it’s not that difficult!
Expert opinion is actually a better way to manage the reliability of monitoring device operation