There is a set of reaction kettle equipment; how to detect leaks?
Thread Content
For the reactor equipment, there are too many sealing surfaces on the pipes and valves connected to it; currently, a pressure test of 0.4 MPa is being carried out using soapy water, but no leaks can be detected. The required vacuum level is now -0.098 MPa, but the vacuum level should be reduced by half in one hour. How should leaks be tested?
Use drone infrared scanning. You can rent someone’s.
Spectral imager. Take a look at the \"cutting-edge technology\" on this device: 22—VOCs spectral imaging technology https://bbs.hcbbs.com/thread-3080864-1-1.html
This technology can detect leaks; it requires gas to leak into the environment in order to be detected. Internal leaks in closed pipelines when the valves are closed cannot be detected. It is difficult to identify internal leaks in situations where there are many pipes connecting containers; it is necessary to check each one individually based on the likelihood of leakage
It looks very high-end, but for such a small business, it’s better not to go for it.
One of the essential tools for production operations; their prices vary depending on performance and cost. Spectral imaging devices with basic functions are not expensive – a manager can afford to purchase one by skipping just one meal.
This post was last edited by The wise on 2022-3-4 at 12:51 due to a computer operation error; it happened again.
This post was last edited by The wise on 2022-3-4 at 12:48. The computer is having issues again.
This post was last edited by The wise are enlightened on 2022-3-4 at 12:50. The computer is having operational issues; it keeps happening.