There is an existing pipeline connected to the air tank. Due to slight vibration when the tank is filled and discharged, cracks occur in the pipe joints and reinforcing rings. Is there any way to modify it?
Thread Content
There is an existing pipeline connected to the air tank. Due to slight vibration when the tank is filled and discharged, cracks occur in the pipe joints and reinforcing rings. Is there any way to modify it?
The end of the air inlet pipe extending into the tank should be porous or notched. The type can refer to the design of the tower air inlet pipe. The gas should not be directed towards the cylinder. The air inlet flow should be dispersed to reduce vibration.
Add a compensator. If the temperature is below 100 degrees, just add a rubber one. If the temperature is high, add a stainless steel bellows.
Hello, can you give me a schematic diagram? Thank you.
Please refer to GB 50160. Flexible connections must be used for the inlet and outlet of storage tanks: lol
Add corrugated pipe or a section of metal hose.