I need to carry out an optimized design for a heat exchanger soon, but I don’t know where to start
Thread Content
How to select and design heat exchangers for the arilsartan API production workshop – what to do and where to start
Take a look at books on narrow-point design, carbon-1 chemical processing technologies, and methanol engineering
1. First, the structural form is selected and determined. 2. Determine the steel material for the tube side and the shell side based on the properties of the medium. 3. The calculation of the heat exchange area is carried out based on the process conditions. 4. Prepare a layout diagram of the outlet positions based on the pipe port locations provided by the piping specialty. These are roughly the main points; I’m not sure if this can help the person on the first floor
If the heat exchanger has not been calculated yet, calculate it first, and then consider its type, size, and so on；
It’s obvious this is a graduation project – there’s not even a preliminary selection of heat exchangers; what is there to optimize? In the case of actual projects, with such a small scale, techniques such as narrow-band technology or heat exchange network optimization, which are used in large-scale chemical processing, are completely unnecessary; for processes with low production volumes but high added value, stability comes first