Does anyone manufacture heat exchangers for flue gas emission locations?
Thread Content
1) We must heat the water, to at least 90 degrees Celsius. 2) The flow rate of the heated water is 12 cubic meters per hour. 3) The diameter of the chimney is 20 inches. 4) The temperature of the steam is 190 degrees Celsius. As shown in the figure. Add me on WeChat if you have any questions. Please do not contact unless you are from the manufacturer. Thank you. 139 63639813
This post was last edited by wiseboy on 2018-7-27 at 11:50. You’re still being so arbitrary with your insistence that only the manufacturer should handle things; moreover, the approach you suggest isn’t necessarily the right one, giving you a 50% chance of failure. :D
If it’s possible, please contact me at 13963639813. Thank you.
Contact Dr. Wang at 13564772361