Design of heat exchangers for flue gas and water exchange
Thread Content
The inlet temperature of the flue gas is 310°C, and the outlet temperature is 206°C; the flow rate is 0.98 kg/s. The inlet temperature of water is 70°C, and the outlet temperature is 95°C; the flow rate is 1.05 kg/s. Which type of heat exchanger should be used? And how to design the calculations?
I just did something similar with a client in Shanghai!
13093022738V I
This post was last edited by wiseboy on 2019-4-18 at 12:23. I designed it, but I doubled the volume of gas and liquid; the manufacturer thought it was too small and refused to produce it. It’s just a heat exchanger weighing a few hundred kilograms. If you really insist on using your desired processing volume, you just need to change “1.96” to “0.98” in the software; pressing Enter will give you the result for that processing volume. 2. 3. 4.
Stainless steel plate-fin heat exchanger, high efficiency and small size. 19962065290
A heat exchanger in the form of a small U-tube can be made