Plate heat exchanger cycle schematic diagram

Thread Content

Plate heat exchanger is an ideal equipment for liquid-liquid and vapor-liquid heat exchange. The editor below introduces the circulation schematic diagram and working principle of the plate heat exchanger.: Plate heat exchanger cycle schematic diagram: Structural principles of plate heat exchanger: Plate heat exchanger is a new type of high-efficiency heat exchanger made of stacked metal plates with a certain corrugated shape. The structural components include plates, gaskets, compression plates (movable compression plates and fixed compression plates), frames (upper and lower guide rods, front pillars), and clamping bolts. Thin rectangular channels are formed between each plate, and the plates are sealed and guided by sealing gaskets to separate the cold/hot fluid channels. The cold/hot heat exchange medium flows through the respective channels and exchanges heat with the separated plates to achieve the temperature required by the user. Working principle of plate heat exchanger: The plate heat exchanger is made up of many thin plates stamped with special corrugated shapes at certain intervals, sealed by gaskets around them, and overlapped and compressed by frames and compression screws. The four corner holes of the plates and gaskets form the distribution pipe and collection pipe of the fluid. At the same time, the hot and cold fluids are reasonably separated so that they can flow in the flow channels on both sides of each plate, and heat exchange is carried out through the plates. The structure and heat exchange principle of the plate heat exchanger determine that it has the characteristics of compact structure, small footprint, high heat transfer efficiency, great operational flexibility, wide application range, small heat loss, and easy installation and cleaning.