Thread Content
Conveyor belts are widely used, and protection systems for them are essential. The protection of belt conveyors mainly involves the following procedures: 1. Belt conveyors should be equipped with fixed personal protective devices during operation. The monitor must possess the usual skill knowledge and be familiar with the functions of the conveyor belt. 2. The company shall draft the \"Equipment Protection, Maintenance, and Safe Operation Procedures\" for the belt conveyor regarding the compliance with braking brakes. Staff must have a shift schedule. 3. The feed supplied to the belt conveyor is uniform enough; the feed hopper is not filled, and when it is filled with material, it becomes stacked. 4. During the operation of the belt conveyor, no unauthorized persons shall approach the machine; no one shall touch any rotating parts. Any defects that cannot be eliminated immediately but do not have a significant impact on operation should be rectified while the machine is running. Defects should be recorded and eliminated during repair. 5. When protecting the mesh belt conveyor, it is necessary to regularly check the operation of each component, inspect the bolts to ensure they are secure, and tighten them promptly if any loosening is detected. However, when stopping the conveyor belt, its working components should be cleaned and repaired. 6. The screw tensioning device of the tail unit has been properly adjusted, and the conveyor belt of the belt conveyor possesses the appropriate tension for normal operation. Protective personnel should always check the operation of the conveyor belt. Certain damages should be determined based on the extent of the damage (whether it affects production) and whether immediate replacement is necessary or a decision on replacement needs to be made. The removed conveyor belts should be used for other purposes depending on their degree of wear. 7. Monitoring the belt conveyor involves checking its operation, cleaning it, ensuring its levelness, and inspecting the adjustments of the screw tensioning equipment, among other related tasks. 8. Belt conveyors are usually started with no load and continue to operate after the material has been unloaded. 9. In addition to ensuring smooth operation of the belt conveyor and replacing damaged parts as necessary during its use, it is also important to carry out maintenance tasks several times every 6 months. Replace lubricating oil, etc. 10. The company can determine the maintenance schedule based on the operating conditions of the belt conveyor.