Briefly describe the 5 installation requirements for belt conveyor equipment

Thread Content

1. Horizontal installation of the conveyor frame: After installing the belt conveyor, each foot must be adjusted until the entire unit is horizontal. 2. Installation of the mesh belt on the conveyor belt: When installing the mesh belt, it is necessary to pay attention to measuring the contact dimension between the chain and the track, ensuring that the mesh belt makes full contact with the track without any twisting or misalignment. After determining the accurate length, carry out circular joining. 3. Adjustment of the tension of the mesh belt conveyor: The initial adjustment of the mesh belt tension should be set at a level slightly looser than the normal tension. 4. Installation of the drive motor for the belt conveyor: The motor must be fixed securely, the chain tension should be adjusted to the proper level, and then the sealing cover should be installed. 5. Commissioning and starting of the belt conveyor: In winter, it is necessary to start the conveyor gradually; set the frequency converter to 40HZ, and only press the button once no noise or vibration is detected.