Thread Content
Each piece of mechanical equipment has strict operating procedures; only by following the correct methods of operation can the failure rate of such equipment be reduced. The same is true for flexible conveyor systems; incorrect operation can lead to malfunctions in the mechanical equipment. Therefore, it is essential to follow the specifications during operation; for this reason, the editor has summarized five key operating principles for flexible conveyor systems for you. 1. Turn off the main power switch, and check whether power is being supplied properly to the flexible conveyor system as well as whether the power indicator light is on. Proceed to the next step after it returns to normal. II. Turn off the power switches for each circuit and check whether everything is functioning properly. Under normal conditions: the equipment does not operate, the indicator light for the flexible conveyor system is off, the power indicator lights of devices such as the frequency converter are on, and the display panel of the frequency converter shows normal operation (with no error codes displayed). III. Start each electrical device in sequence according to the process flow; after one electrical device in the flexible conveying system has started properly (the motor or other device has reached its normal speed and operating condition), proceed to start the next electrical device. IV. Secondly, it is important to ensure that personnel of all types do not touch the moving parts of the flexible conveyor system; untrained individuals should not handle electrical components or control buttons without permission. V. Finally, during the operation of the flexible conveyor system, it is not allowed to disconnect the circuit downstream of the inverter; if maintenance is necessary, it must be carried out with the inverter stopped, otherwise the inverter may be damaged.