**Are there any special requirements for monitoring within the reservoir area?
Thread Content
**Are there any special requirements for monitoring within the reservoir area? Such as full coverage, clarity. Please ask an expert to explain it
Hazardous chemicals are under close surveillance; cameras are installed at the tank connections (pipe openings, vent valves, loading areas) as required by the inspection experts
What about the top of the gasoline and diesel storage tanks? Are there any requirements?
My understanding is that every connection point on the tank needs to be monitored; those connections that are not used very often should simply be sealed off
High-definition cameras with no gaps are to be used for 24/7 surveillance around the area outside the reservoir； License plate recognition cameras should be installed at intersections on the main roads 1 kilometer away from the reservoir area ； Infrared alarm measures should be installed on the walls of the reservoir area ； The reservoir area entrance combines an internal identity recognition access card system with an external facial recognition camera-based access control system ； Seamless movable high-definition camera surveillance within the reservoir area ； Dynamic parameters of facilities such as liquid level, pressure, and temperature, fire smoke early warning, security monitoring, and data reports are all integrated into the SCADA distributed control center ； For key tasks, remote supervision using high-definition cameras is combined with on-site personnel for handling ； All openings of the vehicle are sealed with QR code plomb seals, which are scanned using a scanner to enable wireless transmission to a remote terminal.
Refer to: AQ3035, AQ3036, GB17681