Is the titanium coil resistant to dilute hydrochloric acid?
Thread Content
The reaction vessel needs to be fed with 5% dilute hydrochloric acid, which participates in the reaction; the reaction temperature is between 5 and 10 degrees. By the end of the reaction, 0.5% of hydrochloric acid remains. Now I want to add coils – can titanium ones be used?
If it is as you described, titanium can be used. But if it is above 5%, it can dissolve quickly even at room temperature. The figure below was found in a certain literature. Please refer to this.
For the corrosion rate table, please refer to it； Please let me know if there are any other media.
5% hydrochloric acid can be used with titanium materials. What is the specific temperature you are using it at?
If the possibility of operating beyond the specified conditions is not taken into account, using Ti is no problem~~~ For a choice that takes cost into consideration, S31603 can be used; an even better option is 1.4529~~~